LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1992 >> Sundance Base, 2D Hatchback, 2.2 D, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Disc & Drum) >> Removal & Installation >> Front Brake Rotor >> Installation

Front Brake Rotor: Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1991 Plymouth Sundance, 1991 Plymouth Acclaim, 1991 Dodge Spirit, 1991 Dodge Shadow, and 1991 Dodge Dynasty. However, it is still accessible from the selected car via links, so may be relevant.

Clean both sides of rotor with alcohol or solvent. Install rotor/hub assembly on spindle. Install outer wheel bearing, thrust washer and nut. Tighten wheel bearing adjusting nut to 20-25 ft. lbs. (27-34 N.m) while rotating rotor. Back off adjusting nut to release preload. Retighten adjusting nut finger tight. Install nut lock, cotter pin and grease cup. To complete installation, reverse removal procedure.

scientia non olet · About LEMON Manuals