LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1992 >> Sundance Base, 2D Hatchback, 2.2 D, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Disc & Drum) >> Removal & Installation >> Axle Hub Bearings: Fwd >> Installation

Axle Hub Bearings: Fwd: Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1991 Plymouth Sundance, 1991 Plymouth Acclaim, 1991 Dodge Spirit, 1991 Dodge Shadow, and 1991 Dodge Dynasty. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Tighten new wheel bearing nut to 144-188 ft. lbs. (195-255 N.m). Bleed brake system. See BLEEDING BRAKE SYSTEM  . Adjust parking brake lever stroke. Refer to either PARKING BRAKE ADJUSTMENT (DISC BRAKE)  for 4-wheel disc models or PARKING BRAKE ADJUSTMENT (DRUM BRAKE)  for models with rear drum brakes under ADJUSTMENTS.

scientia non olet · About LEMON Manuals