LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1992 >> Sundance Base, 2D Hatchback, 2.2 D, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Disc & Drum) >> Bleeding Brake System >> Pressure Bleeding

Pressure Bleeding

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1991 Plymouth Sundance, 1991 Plymouth Acclaim, 1991 Dodge Spirit, 1991 Dodge Shadow, and 1991 Dodge Dynasty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean master cylinder cap and surrounding area; remove cap. With pressure tank at least half full, connect tank to master cylinder using proper adapter(s).
  2. Attach bleeder hose to first bleeder valve to be serviced (LR or RR). Place other end of hose in clean transparent container. Partially fill container with clean brake fluid so end of hose is submerged in fluid.
  3. Open release valve on pressure bleeder. Open bleeder valve 1-2 turns, noting fluid flow. When fluid flowing into container is clear and free of bubbles, close bleeder valve securely.
  4. Repeat procedure for remaining bleeder valve in appropriate sequence. See BLEEDING PRECAUTIONS  . Close release valve on pressure bleeder. Remove pressure tank from master cylinder and check fluid level of master cylinder reservoir.
scientia non olet · About LEMON Manuals