LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1992 >> Sundance Base, 2D Hatchback, 2.2 D, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Disc & Drum) >> Bleeding Brake System >> Manual Bleeding

Manual Bleeding

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1991 Plymouth Sundance, 1991 Plymouth Acclaim, 1991 Dodge Spirit, 1991 Dodge Shadow, and 1991 Dodge Dynasty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fill master cylinder. Install clear vinyl bleeder hose onto first bleeder valve to be serviced (LR or RR). Place other end of hose in clean transparent container.
  2. Partially fill container with clean brake fluid so end of hose is submerged in fluid. Open bleeder valve 1-2 turns. Slowly depress brake pedal through its full travel.
  3. Close bleeder valve and release pedal. Pump pedal several times to push air toward wheel cylinders. Repeat procedure until flow of brake fluid is clear and free of bubbles. Proceed to next bleeder valve of brake bleeding sequence. See BLEEDING PRECAUTIONS  .
NOTE: Check fluid level in master cylinder frequently during bleeding sequence.
scientia non olet · About LEMON Manuals