LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1992 >> Sundance Base, 2D Hatchback, 2.2 D, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Disc & Drum) >> Bleeding Brake System >> Bleeding Procedures

Bleeding Procedures

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1991 Plymouth Sundance, 1991 Plymouth Acclaim, 1991 Dodge Spirit, 1991 Dodge Shadow, and 1991 Dodge Dynasty. However, it is still accessible from the selected car via links, so may be relevant.

Hydraulic system bleeding is necessary whenever air is introduced into system. Bleeding may be done manually or by using pressure bleeding equipment. Bleed brakes at all 4 wheels if master cylinder has run dry, been replaced or if hydraulic system has been overhauled.

NOTE: For vehicles with Anti-Lock Brakes Systems (ABS), see appropriate ANTI-LOCK BRAKE SYSTEM article in the BRAKES section.
scientia non olet · About LEMON Manuals