Removal & Installation: Accumulator: Installation
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 1992 Eagle Premier, 1992 Dodge Monaco, 1992 Dodge Dynasty, 1992 Chrysler New Yorker Fifth Avenue, and 1992 Chrysler New Yorker. However, it is still accessible from the selected car via links, so may be relevant.
Install accumulator onto hydraulic assembly and torque to 30 ft. lbs. (40 N.m). Turn ignition on. Let hydraulic system pressurize. Check for leaks at hydraulic assembly-to-accumulator fitting.