LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1992 >> Sundance Base, 2D Hatchback, 2.2 D, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Bleeding Brake System >> Pressure Bleeding

Pressure Bleeding

NOTE: For vehicles with Anti-Lock Brakes Systems (ABS), see appropriate ANTI-LOCK BRAKE SYSTEM article in this section.
  1. Clean master cylinder cap and surrounding area. Remove cap. With pressure tank at least half full, connect tank to master cylinder using proper adapter(s).
  2. Attach bleeder hose to first bleeder valve to be serviced (LR or RR). Place other end of hose in clean transparent container. Partially fill container with clean brake fluid. Submerge end of hose in fluid.
  3. Open release valve on pressure bleeder. Open bleeder valve 1-2 turns, noting fluid flow. When flow is clear and free of bubbles, close bleeder valve securely.
  4. Repeat procedure for remaining bleeder valves in appropriate sequence. See BLEEDING SEQUENCE . Close release valve on pressure bleeder. Remove pressure tank from master cylinder. Check fluid level of master cylinder reservoir.
scientia non olet · About LEMON Manuals