LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1992 >> Sundance Base, 2D Hatchback, 2.2 D, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Testing >> Sending Unit Test >> Coolant Temperature & Oil Pressure

Coolant Temperature & Oil Pressure

  1. Disconnect suspected sending unit connector from engine component. Turn ignition on. Using 12-volt test light, ground sending unit harness connector terminal. Gauge should read at or above its maximum reading, proving sender unit wiring circuit and gauge are good. If gauge responds as indicated, replace sending unit.
  2. If gauge does not respond as indicated, gauge is faulty or there is an open in wiring circuit. If original problem was gauge reading at or above its maximum reading, suspect a grounded sending unit or short in wiring circuit. Repair or replace as required.
scientia non olet · About LEMON Manuals