LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1992 >> Sundance Base, 2D Hatchback, 2.2 D, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Removal & Installation >> Switch Pod R & I >> Removal & Installation (AG & AJ Bodies)

Removal & Installation (AG & AJ Bodies)

  1. Disconnect negative battery cable. At top front of instrument panel hood, pry edge of panel vent grill upward to disengage clips and remove panel vent. See Figure . Remove 2 screws located under panel vent grill.
  2. Remove 2 screws from underneath outer front edges of hood switch pod. Carefully pull switch pod outward and disengage wiring connections. Remove switch pod assembly. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals