LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1991 >> Laser RS Turbo, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VIN [R] & 2.0L 4-CYL Turbo - VIN [U] >> Removal & Installation >> Oil Pan >> Removal (2WD)

Removal (2WD)

  1. Drain engine oil. Remove crossmember near transaxle end of oil pan. Disconnect exhaust pipe at exhaust manifold. On turbo models, disconnect turbo oil return pipe at oil pan.
  2. On all models, remove oil pan bolts. Install Oil Pan Remover (MD998727) between oil pan and cylinder block to break sealant from cylinder block. Remove oil pan.
NOTE: Rest engine on engine mount before tightening crossmember mount through bolt.
scientia non olet · About LEMON Manuals