LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1991 >> Laser RS Turbo, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VIN [R] & 2.0L 4-CYL Turbo - VIN [U] >> Removal & Installation >> Oil Pan >> Installation (4WD)

Installation (4WD)

To install, reverse removal procedure. Apply a .16" (4.1 mm) diameter bead of Sealant (MZ100168) on oil pan sealing surface. Ensure sealant is on inside of bolt hole and centered in groove on oil pan flange. Tighten bolt to specifications. See TORQUE SPECIFICATIONS  at end of article.

scientia non olet · About LEMON Manuals