Resistance Test

Remove instrument cluster. See INSTRUMENT CLUSTER under REMOVAL & INSTALLATION. Measure resistance between appropriate terminals of instrument cluster or combination gauges. See Fig 1 -Fig 3 . See FUEL GAUGE RESISTANCE SPECIFICATIONS . If resistance readings are not to specifications, replace fuel gauge.

FUEL GAUGE RESISTANCE SPECIFICATIONS

Application	Terminals	Ohms
Colt, Colt 200, Mirage & Summit	A & B	77-93
A & C		59-71
B & C		76-92
Colt Vista	A & B	99-121
B & C		149-182
C & A		50-61

Fig 1: Fuel Gauge Check Terminal ID (W/Tach Except Colt Vista)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Fuel Gauge Check Terminal ID (W/O Tach Except Colt Vista)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 3: Fuel Gauge Resistance Check Terminal ID (Colt Vista)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.