LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1990 >> Horizon Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.2L 4-CYL - VINS [C,D] & 2.5L 4-CYL - VINS [J,K] >> Removal & Installation >> Camshaft, Crank Or Intermediate Sprocket Oil Seal >> Removal

Camshaft, Crank Or Intermediate Sprocket Oil Seal: Removal

  1. Remove timing belt. See TIMING BELT . For crankshaft sprocket seal replacement, remove crankshaft sprocket retaining bolt. Using Crankshaft Sprocket Puller/Installer (C-4685) with puller insert, remove crankshaft sprocket. See Figure.
  2. To remove camshaft or intermediate shaft sprockets, use Sprocket Holder (C-4687) with Adapter (C-4687-1) to hold sprocket and remove sprocket bolt. See Figure. Note direction of sprocket offset for reassembly reference. Remove sprocket.
  3. Using Crankshaft Sprocket Seal Remover (C-6341) or Intermediate Shaft & Camshaft Seal Remover (C-4679), remove sprocket oil seals. See Figure.
scientia non olet · About LEMON Manuals