Camshaft, Crank Or Intermediate Sprocket Oil Seal: Installation

1. Using Crankshaft Seal Installer (C-6342) or Intermediate Shaft & Camshaft Seal Installer (C-4680), install seal until even with surface. See Fig 3 and Fig 4.
2. Using crankshaft sprocket puller/installer and thrust bearing, install crankshaft sprocket See Fig 1. To install remaining components, reverse removal procedure. Ensure all timing marks are aligned during timing belt installation.

Fig 1: Crankshaft Sprocket Removal & Installation

Courtesy of CHRYSLER MOTORS.

Fig 2: Removing Sprocket Oil Seals

Courtesy of CHRYSLER MOTORS.

Fig 3: Installing Crankshaft Sprocket Oil Seal

Courtesy of CHRYSLER MOTORS.

Fig 4: Installing Intermediate Or Camshaft Sprocket Oil Seal

Courtesy of CHRYSLER MOTORS.