Disc Brake Caliper & Pads - Rear (Dynasty, Fifth Avenue, Imperial & New YORKER): Removal

1. Raise and support vehicle. Remove wheel and tire assembly. Release parking brake and cycle brake pedal. Manually pull caliper assembly toward outside of vehicle so that piston will be retracted.
2. Drive out disc pad retainer pin and remove 2 caliper mounting bolts. See Fig 1. Lift caliper up and away from disc. Suspend caliper on wire hook to prevent damage to brake hose. Remove disc pads.

Fig 1: Removing Rear Brake Assembly Retainer Pin (C & Y Body)

Courtesy of CHRYSLER MOTORS.