LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1990 >> Horizon Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Overhaul >> Disc Brake Caliper - Rear (Except MONACO & Premier) >> Dust Boot Removal Installation

Dust Boot Removal Installation

  1. Clean caliper with alcohol or solvent. Using a screwdriver, remove dust boot. Dip new dust boot in clean brake fluid.
  2. On Dynasty, Fifth Avenue, Imperial and New Yorker, position boot over piston and use Dust Boot Installer (C-4383-7) to seat boot into caliper.
  3. On Daytona and LeBaron calipers, position boot over piston and install retainer to hold boot to caliper.
scientia non olet · About LEMON Manuals