Parking Brake - W/Drum Brakes (Except MONACO & Premier)
- Ensure service brakes are properly adjusted. Back off parking brake cable adjustment until it is slack. Clean and lubricate cable threads. Using Adjuster (C-3784) and a thin screwdriver inserted in brake adjusting hole to disengage adjusting lever, rotate star wheel to obtain light contact between brake shoe and drum.
- Back off star wheel until no drag is felt. Adjust parking brake cable adjuster nut until a slight drag is felt while rotating rear wheels. Loosen adjusting nut until wheels just turn freely, then back off nut 2 full turns. Apply and release parking brake several times to ensure rear wheels DO NOT drag.