LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1990 >> Colt GL, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [T], 2.0L 4-CYL [V], 2.4L 4-CYL [W] >> Lubrication >> Oil Pump & Front Cover >> Disassembly & Inspection (Colt Vista 2.0L & Ram-50 2.4L)

Disassembly & Inspection (Colt Vista 2.0L & Ram-50 2.4L)

  1. Remove rear cover. Mark direction of gear installation for reassembly reference. Place straightedge across front cover housing and measure end play between each gear and straightedge. Check clearance between tip of gear teeth and cover.
  2. Check pressure relief valve for restriction in bore. Check free length of relief valve spring. Replace components if not within specification. See OIL PUMP SPECIFICATIONS (2.0L & 2.4L)  table.
OIL PUMP SPECIFICATIONS (2.0L & 2.4L)

Application In. (mm)
Gear-Tip-To-Case .010 (.25)
Gear Side Clearance .010 (.25)
Relief Valve Spring Free Length 1.84 (46.6)
scientia non olet · About LEMON Manuals