Front Disc Brake Pads: Installation

Remove master cylinder reservoir cover. If installing new pads, compress piston to bottom of bore. Install retaining clips, pad assembly, shim(s), shim holder (if equipped), and anti-squeak shim onto support mounting. See Fig 1 or Fig 2 .

Fig 1: Exploded View of Front Disc Assembly (Colt, Colt 200, Summit)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Exploded View of Front Disc Brake Assembly (All Others)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.