LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1990 >> Colt Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [T], 2.0L 4-CYL [V], 2.4L 4-CYL [W] >> Removal & Installation >> Fuel Pressure Release

Fuel Pressure Release

Disconnect fuel pump connector near fuel tank. See Fig 1. Start engine and allow to idle until it stalls. Turn ignition off. Reconnect fuel pump connector. Disconnect negative battery cable before disconnecting fuel lines.

Fig 1: Locating Typical Fuel Pump Connector
G91D00813Courtesy of MITSUBISHI MOTOR SALES OF AMERICA
scientia non olet · About LEMON Manuals