LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1990 >> Colt Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [T], 2.0L 4-CYL [V], 2.4L 4-CYL [W] >> Removal & Installation >> Engine >> Installation (Colt Wagon 1.8L)

Installation (Colt Wagon 1.8L)

  1. To install, reverse removal procedure. Install support rod (roll rod) in original direction, with marked side facing down.
  2. Perform final tightening of mounting bolts and nuts with weight of engine on insulators. Replace all fluids and adjust all control cables and linkages.
scientia non olet · About LEMON Manuals