LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1990 >> Colt Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [T], 2.0L 4-CYL [V], 2.4L 4-CYL [W] >> Lubrication >> Oil Pump & Front Cover >> Installation (Colt Wagon 1.8L)

Installation (Colt Wagon 1.8L)

  1. Install new drive shaft into oil pump cover. Install new crank shaft oil seal into front cover. Lubricate inner and outer rotors with oil. Install inner and outer rotors into oil pump cover. Ensure timing mark on inner rotor align with mark on outer rotor.
  2. Install new oil pump cover gasket into groove in oil pump cover. Install oil pump cover onto front cover. Install front cover onto cylinder block. To install remaining components, reverse removal procedure.
scientia non olet · About LEMON Manuals