LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1989 >> Colt Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL - VIN [T] & 2.0L 4-CYL - VINS [D,V] >> Removal & Installation >> Jet Valve >> Disassembly & Inspection

Disassembly & Inspection

  1. Using Spring Pliers (MD998309), compress spring and remove retainer lock, spring retainer and valve spring. Remove valve stem seals. Check jet valve head and seat for damage.
    CAUTION: Jet valve components must be reassembled in original body. DO NOT  mix jet valve components.
  2. Ensure valve slides smoothly in body without play. Check valve stem O.D. and valve spring free length and load. If not within specification, jet valve and body should be replaced as an assembly. See ENGINE SPECIFICATIONS tables.
scientia non olet · About LEMON Manuals