Cylinder Block Specifications
CYLINDER BLOCK SPECIFICATIONS
| Application | In. (mm) | ||
|---|---|---|---|
| 1.8L | |||
| Maximum Block Warp | .004 (.10) | ||
| Cylinder Bore | |||
| Standard Diameter | 3.173 (80.59) | ||
| Maximum Taper | .0008 (.02) | ||
| Maximum Out-of-Round | .0008 (.02) | ||
| 2.0L | |||
| Maximum Block Warp | .004 (.10) | ||
| Cylinder Bore | |||
| Standard Diameter | 3.347 (85.01) | ||
| Maximum Taper | .0004 (.01) | ||
| Maximum Out-of-Round | .0004 (.01) | ||