Cylinder Head Specifications
CYLINDER HEAD SPECIFICATIONS
| Application | In. (mm) | |||
|---|---|---|---|---|
| 1.5L | ||||
| Maximum Cylinder Head Warp | ||||
| Standard | .002 (.05) | |||
| Service Limit | .008 (.20) | |||
| Seat Angle (All) | 45° | |||
| Seat Width (All) | .035-.051 (.88-1.29) | |||
| Valve Stem Oil Clearance | ||||
| Intake | ||||
| Standard | .0008-.0020 (.020-.050) | |||
| Service Limit | .004 (.10) | |||
| Exhaust | ||||
| Standard | .0020-.0035 (.050-.089) | |||
| Service Limit | .004 (.10) | |||
| 1.6L | ||||
| Maximum Cylinder Head Warp | ||||
| Standard | .002 (.05) | |||
| Service Limit | .008 (.20) | |||
| Seat Angle (All) | 45° | |||
| Seat Width (All) | .035-.051 (.88-1.29) | |||
| Valve Stem Oil Clearance | ||||
| Intake | ||||
| Standard | .0008-.0019 (.020-.048) | |||
| Service Limit | .004 (.10) | |||
| Exhaust | ||||
| Standard | .0020-.0033 (.050-.084) | |||
| Service Limit | .006 (.15) | |||