LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1987 >> Horizon Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Brake System Bleeding >> Servicing Metering Valve

Servicing Metering Valve

  1. On disc brake equipped vehicles, the metering section of the combination valve must be deactivated before bleeding.
  2. To hold the metering valve open to pressure bleed the front brakes, the valve stem must be pushed in or pulled out. Loosen front mounting bolt and install tool (J-23709) on the combination valve. Stem should be fully extended or depressed.
Fig 1: Deactivating Metering Valve for Bleeding (Typical Method & Tool)
G26883Courtesy of CHRYSLER MOTORS
scientia non olet · About LEMON Manuals