LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1985 >> Turismo Base, 2.2 C, Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Adjustments >> Rear Wheel Bearings

Rear Wheel Bearings

  1. Tighten spindle adjusting nut to 240-300 INCH lbs. (27-34 N.m), while rotating wheel. Back off adjusting nut to release bearing preload. Finger tighten adjusting nut. See Figure.
  2. Position lock nut, aligning one pair of slots in line with cotter pin hole. Install new cotter pin. Adjustment should provide .001-.003" (.03-.08 mm) end play. Clean and install grease cap.
scientia non olet · About LEMON Manuals