LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1985 >> Turismo Base, 2.2 C, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Wheel Bearings - RWD Models >> Removal

Front Wheel Bearings - RWD Models: Removal

  1. Raise and support vehicle. Remove wheel and tire assembly. Remove grease cap, cotter pin, nut lock, and bearing adjusting nut. Remove disc brake sliding caliper retaining clips and anti-rattle springs. Slowly slide caliper assembly away from brake disc and support caliper housing on steering knuckle.
  2. Remove thrust washer and outer bearing cone. Slide wheel hub and disc assembly off spindle. Carefully drive out inner seal and remove bearing cone with 3/4" diameter non-metallic rod.
scientia non olet · About LEMON Manuals