LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1985 >> Turismo Base, 2.2 C, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Wheel Bearings - Fwd Models >> Removal

Front Wheel Bearings - Fwd Models: Removal

  1. Remove steering knuckle and separate from hub with hub remover (L-4539). To separate, place washer and thrust button on hub. Back out retainer screw to hub as far as possible. Position tool and install 2 screws firmly into tapped brake adaption extensions and one screw into retaining screw threads.
    NOTE: Bearing inner races will separate, and outboard race will stay on hub.
  2. Tighten press screw to remove hub through bearing. Remove bearing outer race from hub using hub remover thrust button and puller (L-4534).
  3. Remove bearing retainer. Carefully pry seal from machined recess in knuckle. Press bearing out of knuckle with a 1 5/8" socket. Discard bearing.
scientia non olet · About LEMON Manuals