LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1985 >> Turismo Base, 2.2 C, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Wheel Bearings - Fwd Models >> Installation

Front Wheel Bearings - Fwd Models: Installation

  1. Press new bearing into knuckle with installer tool (L-4463). Press bearing on outer race only. Install bearing retainer. Tighten retaining screws. Press bearing into hub with socket. Push against bearing inner race only.
  2. Position new seal in recess and assembly installer tool (C-4698). Position tool head for installation and install seal. Lubricate full circumference of the seal and wear sleeve with multi-purpose grease. Install knuckle to suspension.
scientia non olet · About LEMON Manuals