LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1985 >> Conquest 2.6 H, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.6L 4-CYL - VIN [E] & 2.6L 4-CYL Turbo - VINS [H,N] >> Removal & Installation >> Valve Springs >> Valve Stem Oil Seals

Valve Stem Oil Seals

After installing valve spring seat, place stem seal on guide. Use Valve Seal Installer (MD998377) and lightly tap seal into position. Do not reuse old seals or twist seals when installing.

scientia non olet · About LEMON Manuals