Oil Pump: Installation
To install, reverse removal procedure. Ensure oil pump gear mating marks are aligned and Woodruff key on counterbalance shaft fits in keyway of driven gear.
CAUTION:
Prior to installing oil pump, prime pump with .33 oz. (10 cc) of engine oil.
OIL PUMP SPECIFICATIONS
| Application | Clearance In. (mm) |
|---|---|
| Gear Tip-to-Body Clearance | .0043-.0059 (.11-.15) |
| Drive Gear Side Clearance | .0032-.0055 (.08-.14) |
| Drive Gear-to-Bearing | .0008-.0020 (.02-.05) |
| Drive Gear-to-Rear Bearing | .0016-.0028 (.04-.07) |
| Driven Gear Side Clearance | .0024-.0047 (.06-.12) |