Engine Identification
NOTE:
For engine repair procedures not covered in this article, see ENGINE OVERHAUL PROCEDURES - GENERAL INFORMATION
article in the GENERAL INFORMATION section.
Engine model code and serial number are stamped on right front side of engine block, just below No. 1 spark plug. The 8th character of Vehicle Identification Number (VIN), located on upper left side of instrument panel, can also be used to identify engine displacement.
ENGINE IDENTIFICATION CODES
| Application | Engine Model | VIN Code | |
|---|---|---|---|
| 2.6L 4-Cylinder | |||
| 2-Bbl. | G54B | E | |
| Turbo | G54B | H | |
| Turbo (Intercooled) | G54B | N | |