LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1984 >> Conquest Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL - VIN [D] & 2.6L 4-CYL - VINS [E,H] >> Removal & Installation >> Counterbalance Drive Chain >> Removal

Counterbalance Drive Chain: Removal

  1. Drain coolant and engine oil. Disconnect negative battery cable. Remove rocker cover, breather and semi-circular seal. Remove alternator, fan belt, fan, water pump pulley and water pump. Remove distributor and oil pan.
  2. Remove crankshaft pulley and timing chain case. Remove chain guides "A", "B", and "C", sprocket locking bolts and crankshaft sprocket. Remove both counterbalance shaft sprockets and drive chain. See Figure and Figure.
scientia non olet · About LEMON Manuals