Counterbalance Drive Chain: Installation

1. Refer to Figs. Fig 1 and Figure for component location, and reverse removal procedure. Ensure that mating marks on sprockets align with plated links on counterbalance chain.
2. Adjust tension by installing guides "A" and "C". Shake counterbalance shaft sprockets to take slack from chain. Adjust guide "B" so there will be .040-.140" (1.0-3.5 mm) clearance between guide and chain at point "P". Tighten guide mounting bolts and complete assembly.

Fig 1: Exploded View of Counterbalance Shafts and Drive Chain Right counterbalance shaft is driven by oil pump.