LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1984 >> Conquest Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Testing >> Ammeter

Instrument Panel - Standard: Testing: Ammeter

  1. On all models, remove ammeter. Connect a 3.4 watt bulb (or 60 ohm resistor) in series with a battery and ammeter.
  2. If ammeter indicates about 6 amps, it is working correctly. Ammeter is a shunt type that normally passes one-thirtieth of current being used in vehicle. do not allow more than 1 amp to pass through ammeter.
scientia non olet · About LEMON Manuals