LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1983 >> Colt Custom, 2D Hatchback, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.4L 4-CYL - VIN [2] & 1.6L 4-CYL - VIN [3] >> Overhaul >> Piston & Connecting Rod Assembly >> Installation

Piston & Connecting Rod Assembly: Installation

  1. To install, lubricate all internal surfaces with engine oil before installation. Make sure "front" mark on piston head faces front of engine.
  2. Use ring compressor and compress rings, without changing their position. Install piston and connecting rod assembly into cylinder block in their original position.
  3. Tap lightly on piston dome with wooden handle tool while guiding connecting rod onto crankshaft. Install rod cap onto proper piston and connecting rod assembly. Tighten attaching bolts. Install cylinder head and oil pan.
scientia non olet · About LEMON Manuals