Removal & Installation (1.6L)
Mounted at lower left of engine, driven by camshaft drive belt. Cover and rotor assembly may be removed after removing drive sprocket by taking out cover bolts and lifting assembly out. Pump may also be removed with engine front cover as an assembly. To install, reverse removal procedure.
CAUTION:
Prior to installing oil pump, fill with sufficient amount of engine oil to prime pump.
OIL PUMP CLEARANCE SPECIFICATIONS
| Application | In. (mm) | |
|---|---|---|
| 1.4L Gear-To-Crescent Type | ||
| Outer Gear-to-Case | .0039-.0079 (.10-.20) | |
| Outer Gear-to-Crescent | .0087-.0134 (.22-.34) | |
| Gear End Play | .0016-.0039 (.04-.10) | |
| Inner Gear-to-Crescent | .0083-.0126 (.21-.32) | |
| 1.6L Trochoid Type | ||
| Side Clearance | .0024-.0047 (.06-.12) | |
| Tip Clearance | .0016-.0047 (.04-.12) | |
| Body Clearance | .0039-.0063 (.10-.16) | |
| Drive Shaft-to-Cover Clearance | .0008-.0020 (.02-.05) | |