LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1981 >> Arrow Pickup Base, Automatic Trans >> Repair and Diagnosis >> Electrical >> Body Electrical >> Switches, Gauges & Instrument Panels - CHRYSLER Corp. Imports >> Testing >> Fuel Gauge

Fuel Gauge

  1. Disconnect fuel gauge sending unit wire. On Colt and Champ models, connect a 17 ohm resistor between wire and ground. On all other models, ground sending unit wire. Fuel gauge should read full.
    CAUTION: Keeping the wire grounded too long can damage coils in gauge. Perform test as quickly as possible.
  2. On Colt and Champ models, connect a 120 ohm resistor between sending wire and ground. On all other models, connect a 95 ohm resistor between sending wire and ground. Gauge should read empty.
scientia non olet · About LEMON Manuals