LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1980 >> Horizon Base, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Switches, Gauges & Instrument Panels >> Removal & Installation >> Speedometer, Cluster, Gauges & Printed Circuit >> Removal (Aspen, Volare, Diplomat, LeBaron)

Removal (Aspen, Volare, Diplomat, LeBaron)

  1. Remove bezel screws, position gearshift in "1" position, and pull bezel away from dash. Remove gear shift pointer by loosening set screw on side of column. Disconnect speedometer cable, remove cluster screws, disconnect wiring, and remove cluster.
  2. Remove odometer knob (if equipped). Remove 4 plastic pins and on Aspen and Volare, 4 screws. Remove lens and on Aspen and Volare only, speedometer needle. Remove 2 screws and speedometer. Service gauges by removing mounting screws.
  3. To remove separate gauge cluster on Diplomat and LeBaron, remove 3 screws, disconnect wiring, and remove cluster. Remove 2 plastic pins, lens, and gauges. To remove circuit boards, pry away from cluster assembly and remove voltage limiter.
scientia non olet · About LEMON Manuals