LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1980 >> Horizon Base, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Switches, Gauges & Instrument Panels >> Adjustment >> Stop Light Switch

Stop Light Switch

  1. Loosen switch assembly screw. Press brake pedal down and release. Place a spacer gauge against pedal-to-switch surface. Use 0.150" spacer on Gran Fury 0.130" on all others.
    NOTE: Do not pull brake pedal back at any time.
  2. Press switch against spacer until plunger is fully depressed. Tighten switch mounting screw, remove spacer, and check switch operation.
scientia non olet · About LEMON Manuals