LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1980 >> Champ Custom, Automatic Trans >> Repair and Diagnosis >> Steering >> Power Steering >> Steering Gears & Linkage CHRYSLER Corp. Imports Rack & Pinion >> Overhaul >> Disassembly

Steering Gears & Linkage CHRYSLER Corp. Imports Rack & Pinion: Overhaul: Disassembly

  1. With rack and pinion assembly mounted in a soft-jawed vise, remove tie rod staking with a chisel. Then, use a wrench to remove tie rod assemblies.
  2. Remove lock nut and using a special socket (MB990607 or equivalent), remove yoke adjusting screw. Remove yoke spring, rubber cushion and support yoke. Carefully pry out oil seal.
  3. Remove snap ring and remove pinion and bearing. Remove snap ring retaining bearing to shaft and press off bearing.
  4. Remove rack from left side of housing to avoid damage from rack teeth during removal.
scientia non olet · About LEMON Manuals