Front Suspension - CHRYSLER Corp. - Except Omni & Horizon: Description

All models use ball joint independent type suspension with torsion bar front suspension. On all models except Aspen, Volare, LeBaron and Diplomat, a longitudinal torsion bar is mounted between inboard end of lower control arm and frame rear crossmember. On Aspen, Volare, LeBaron and Diplomat models, a transverse torsion bar is mounted between outboard ends of lower control arms and the forward portion of the suspension crossmember.

On all models upper and lower control arms are attached to crossmember with steering knuckle connected between control arms. Shock absorber is mounted on lower control arm. On all models except Aspen, Volare, LeBaron and Diplomat, a strut rod is connected to lower control arm. A sway bar is used on all models and on Aspen, Volare, LeBaron and Diplomat, bar also functions as the strut rod.