Trailing Arms: Installation
To install, reverse removal procedure, replacing all lock nuts and lock washers. Torque all nuts and bolts to specifications, however, do not torque lower shock absorber nut and trailing arm pivot nuts until weight of vehicle, with two people in rear seat, is on suspension.
TIGHTENING SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Lower Shock Absorber Nut | 33 (45) |
| Rear Hub Nut | 181 (245) |
| Trailing Arm Pivot Nuts | 47 (64) |
| INCH Lbs. (N.m) | |
| Stabilizer Bar Link Nut | 108 (12) |
| Upper Shock Absorber Nut | 108 (12) |