Turn Signal Switch & Ignition Lock: Removal
- Remove steering wheel as outlined. Pull off signal switch and ignition lock wiring harness. Pull directional lever out of seat (lever is held in place by a lock ball). Detach lower half of steering column cover. Remove hex nut from steering mast jacket attachment at front of instrument panel.
- Unscrew slide-off base from underside of instrument panel and remove upper part of signal switch housing cover. Place thick piece of wood on front seat and allow steering column to rest on it.
- Centerpunch shear-head bolts for lock bracket; drill and remove bolts. Remove steering and ignition lock and signal switch assemblies from mast jacket, and loosely attach slide-off base below instrument panel.
- To remove lock cylinder from its housing, place key in position "1" and push in cylinder lock spring with a stiff wire. Cylinder can now be withdrawn.