RX3 & 808 (1971-72)
Check ball joint at ball joint stud with a spring scale. The revolving torque should be 13.2-24.2 ft. lbs. (1.824-3.344 mkg). If less than 13.2 ft. lbs. (1.824 mkg), replace unit.
Check ball joint at ball joint stud with a spring scale. The revolving torque should be 13.2-24.2 ft. lbs. (1.824-3.344 mkg). If less than 13.2 ft. lbs. (1.824 mkg), replace unit.