Cold Method
- Remove valve cover and gasket.
- Alternately set each piston to TDC of compression stroke.
- Adjust intake valves to 0.008" and exhaust valves to 0.012" lash.
- Reinstall valve cover with new gasket.
PISTONS, PINS, RINGS
| Engine | PISTONS Clearance | PINS | RINGS | |||
|---|---|---|---|---|---|---|
| Piston Fit | Rod Fit | Rings | End Gap | Side Clearance | ||
| 1966-70 | .0004 -.0008" | ..... | Press | Comp. | ||
| 1 | .010-.016" | .0024-.0034" | ||||
| 2 | .010-.016" | .0013-.0025" | ||||
| Oil | .008-.014" | .0013-.0025" | ||||
| 1971 | .0004-.0012" | ..... | Press | Comp. | ||
| 1 | .010-.016" | .0024-.0034" | ||||
| 2 | .010-.016" | .0013-.0025" | ||||
| Oil | .008-.014" | .0013-.0025" | ||||