All Exc. 1970 GT
- Remove hood and disconnect battery cables. Drain cooling system and remove assembly including hoses. Using suitable tool (J-21709) remove shift linkage. Remove air cleaners. Withdraw throttle rod from carburetor and rear support.
- From engine, disconnect fuel line, control cables for carburetors and heater, heater hoses and starter wires, alternator, distributor, and back-up light switch on transmission.
- Remove oil filter and its housing. Disconnect exhaust pipe from exhaust manifold. Raise car and support in safe manner. Remove drive shaft.
- Support transmission with a jack. Attach suitable lift to engine. Remove transmission to crankcase bolts. Extract transmission mounting bolts. Remove engine mounts from each side of engine. Lift engine from car.