LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2001 >> Intrigue GL >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Rear Brake Pads >> Removal & Installation

Removal & Installation

  1. Remove caliper. See REAR BRAKE CALIPER . See Figure. With caliper removed from vehicle, remove rattle clips and pads.
  2. Bottom piston in caliper bore using "C" clamp and metal plate (or wooden block) across piston face. Clean caliper bolts. Use silicone grease to lube unthreaded portions of caliper bolts.
  3. Install new pads with the wear sensors on outside, trailing edge of pad downward. Reinstall caliper and tighten caliper bolts to specification. See TORQUE SPECIFICATIONS . Seat brake pads.
scientia non olet · About LEMON Manuals