LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1999 >> Intrigue GL, 3.5 H >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Anti-Lock Brake System With Traction Control System - Abs-VI) >> Removal & Installation >> Wheel Speed Sensor >> Removal & Installation (Front - Alero, Cutlass, Malibu, 1999 Grand Am & 1999 "W" Body)

Removal & Installation (Front - Alero, Cutlass, Malibu, 1999 Grand Am & 1999 "W" Body)

WARNING: This page is about a different variant/trim than selected.

Front wheel speed sensor is an integral part of front hub and bearing assembly, and cannot be serviced separately. If wheel speed sensor replacement is necessary, hub and bearing assembly must be replaced. See appropriate FRONT article in SUSPENSION.

Fig 1: Identifying Front Wheel Speed Sensor Components (1998 Cutlass & Malibu, 1999 "N" Body, & "W" Body)
G93D76078Courtesy of GENERAL MOTORS CORP.